This standard is issued under the fixed designation D ; the 1 These test methods are under the jurisdiction of ASTM Committee D11 on. ASTM D – Standard Test Method for Coated Fabrics. ASTM D Standard Test Methods for Coated Fabrics.
|Published (Last):||19 November 2014|
|PDF File Size:||8.80 Mb|
|ePub File Size:||17.58 Mb|
|Price:||Free* [*Free Regsitration Required]|
Ten specimens should be cut with the smallest dimension at least This test is used to determine compare the seam strength with the strength of the coated fabric. Blocking Resistance at Elevated Temperatures. The specimens should be rectangles and 50mm W X mm L in size.
ASTM D Coated Fabrics Rainwear Test Equipment
Adhesion Coating to Fabrics. A UTM and vise grips with the same 1×1 and 1×2 inserts are used. Blocking resistance is tested by folding a piece of fabric sample a couple of times and then placing it in between two glass plates. Clamp the specimen in the lower clamp.
Puncture Resistance Another test using a puncture fixture. D Puncture Resistance This test determines the puncture resistance of the coated fabric. Crush resistance is a compression test similar to a shear test. After a set period of time the amount of wicking is measure. Use the same specimens as for breaking strength. Due to the wide variety of test procedure in ASTM D, our test engineers recommend you purchase a universal test machine. Record the force maximum force as the bursting strength of the specimen.
Have a question about conducting the test for this standard? The long term increases in productivity and efficiency out-weigh the initial cost. G Pneumatic Side Opening Grip. Preparing the Specimens for the Tongue Tear Method Five specimens from each of the warp and filling directions should be tested.
ASTM D751 Coated Fabrics Rainwear Test Equipment
The weight is measured on a scale with a smaller piece of the fabric. It involves a fixture that uses a row of needles or nails to grip into the sample. ASTM D features multiple mechanical properties tests for coated fabrics such as tarps, outdoor clothing, and rain wear.
Next run the test machine so that it separates the coating from the backing with axtm uniform speed of. Testing Procedure First place the specimen s751 in the jaws of the grips with the seam centered between the jaws. XyLive Software allows you to watch the data live as the test runs.
This test is similar to ASTM D where a puncture implement with a chamfered edge is used to puncture through the sample. The adhesion test is used when the coating is stronger than the adhesive that binds it to the fabric.
Preparing the Specimens Gather two sets of 5 specimens each for longitudinal and transverse breaking strength. Tack-Tear Resistance The Tack-Tear test fixture is described in scant detail in the official publication.
Testing Procedure First you must place the specimen symmetrically on the base plate of your compression tester or universal testing machine. Procedure A is the preferred method to test, but Procedure B is also acceptable. Call our engineers today for help testing to ASTM D and for help choosing the best test equipment. Call our fixture engineers today and they can provide you with a specialized fixture just for this test.
The test utlizes a tensile testing machine and a pair of vise grips with front grip inserts of 1×1″ and back inserts of 1×2″. Preparing the Specimens Ten specimens should be cut with the smallest dimension at least Specimens should be rectangular in shape and 75mm X mm in size. A piece of coated fabric is pushed onto a small circular button.
Our top universal test machine recommendations are: Blocking Resistance at Elevated Temperatures Blocking resistance is tested by folding aetm piece d71 fabric sample a couple of times and then placing it in between asgm glass plates.
The seam strength test works great for lapped, lapped and bonded, and sewn seams using the modified grab test method.
Small wick sized samples are put into a beaker with a water soluble dye. After creating the specimens, separate the coating from the backing for a distance of 50 mm.
The wicks stand in the beaker and the dye traverses up the fabric by means of wicking. Test Procedure First you should mount the test specimen in the ring clamp. After the sample has been heat aged it is tested using one of the above procedures.
Low Temperature Bend Test. Once the samples are cold enough, the samples are folded in half.
Test Procedure First, mount the test specimen in the ring clamp. Square samples are put into the chamber for conditioning.
Preparing the Specimens Use the same specimens as for breaking strength. Five specimens from each of the warp and filling directions should be tested. A rising water column tester is a simpler device compared to the Mullens tester.
The apparatus is d7751 pulled apart and tearing occurs along where the needles were gripped into the sample. This test is characterized by a spherical plunger fixture.
ASTM D – Coated Fabrics
D Tack-Tear Resistance This test determines the tack-tear resistance of the coated fabric. Wicking of Coated Cloth Small wick sized samples are put into a beaker with a water soluble dye.
This test determines the tack-tear resistance of the coated fabric.